China Bearing Factory Supply Directly 20mm Round Steel Bar Linear Shaft (WCS20 SFC20) with Good quality

Item Description

Solution Description
Linear Shaft is the guiding impact of sliding bearing, which can make the goods of linear movement.
The necessary situations needed by the linear movement method is: simple design, the best functionality, minimal servicing cost, using the selected durable content, high-frequency warmth treatment, the exact outdoors
diameter dimensions, roundness, really straight and surface area therapy, and so on.

Linear Shaft  (Linear rod Steel bar Optical axis)
Item Title Large precision Metal bar 20mm Linear bearing shaft (WCS20 SFC20)
Model No. WCS20 SFC20
Offered Model No. WCS SFC WC SF sequence 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 13mm, 16mm,  20mm,  25mm,  30mm,  35mm, 40mm, 50mm, 60mm, 80mm, 100mm, 120mm, 150mm
Content Carbon Metal, Bearing metal
OEM & ODM Of course
Hardness HRC60 ± two
Hardened layer thickness

.8mm-3mm

Length -6000mm (If you need above 6000mm,we can anti-join for you)
Precision g6
Roughness Within 1.5μm
Straightness Not excessive 1.5μm of 100mm (Rmax)
Other Substance Bearing Steel GCr15, Carbon Steel 45#, SUS440C 
OEM & Personalized We are Professional bearing manufactory in China, the bearing of Higher Top quality can be OEM & Customized in accordance to your requirement, these kinds of as for thread shaft or not, Diminished shaft diameter, Coaxial Holes Drilled and Tapped, Flats-Single or A number of, Important Way, Snap ring Grooves, Radial Holes Drilled and Tapped, Chamfering, and so on.

 

JLD Linear Shaft Software: 

1. Sound shaft
Generally applicable to industrial robots, as a professional measuring devices, medical equipment, precision machine resources, aircraft shaft, pneumatic mandrel motion portion. 
two. Hollow shaft
With its weight to decrease tools, simplify the framework of the benefits, you can then put on the interior measurement of wire, compressed air, can also insert lubricants and hydraulic oil. 
3. Stainless steel shaft
It truly is generally suitable for use as a part of the measurement in the presence of chemical compounds such as chemical substances, seawater and other
Substances. 
Special machining shafts are finely concluded right after warmth treatment method with difficult chrome plating for all types of automation gear. 

JLD Special Machining for Linear Shaft: 
1. For the Length 

We can offer linear shaft with diameterφ5mm-φ150mm. Maxium duration up to 6000mm. 

When you are unique requirements on length, we can meet up with your machining demands with various size. 

When you ask for earlier mentioned 6000mm, we can anti-link for you. 

2. For Particular Processing

When you have particular needs on machining. Such as threading, coaxial holes drilled and tapped, radial holes drilled and tapped, lowered shaft diameter and so forth, we can device for you, and these specific machines are completed soon after heat therapy and tough chromic so that guarantee the precision of product. 

Send us your detailed sketch or blue print for propmt quotation and action, you must be happy with our provider. 

 

 

About Us

HangZhou Town CZPT Bearing Co., Ltd. is a professional company of linear motion goods given that 2007. We specialised in producing linear guidesball screwslinear shaftslinear movement slide unitslinear bearingsrod finishes bearingscam follower bearings/Needle roller bearingprecision linear module with very good high quality and competitive cost. For OEM service, the products can be Tailored according to customers’ demands for normal or non-common bearings. 

Our Companies

Our High quality: 
High quality is the life. We use only the greatest good quality material to guarantee the standard of our product selection is of the optimum caliber. 
All products we offered out are strictly selected and analyzed by our QC department. 
Warranty: 
We offer 1 calendar year warranty for all items. 
Payment: 
We acknowledge payment via TT (Bank transfer), Paypal, Western Union, and Funds Gram. 
We take bank transfer for large orders. For modest purchase, you would better pay out by way of Paypal, Western union or Funds Gram
Delivery: 
We offer as numerous delivery options as attainable, like DHL, UPS, TNT, FedEx and EMS, Airfreight and by Sea. 

FAQ
one. Are you manufacturing unit or investing organization? 
We are factory with most competitive cost and substantial good quality. We are Alibaba Gold Supplier vendor since 2011. 

two. Tailored accepted? 
Yes, of system, this sort of as the bearing brand name of Japanese, United states of america, Sweden and so on are accessible. If that, remember to send out us the drawing of the sort with the photo will be most appreciated. 

3. Can I get some samples or a lot more special discounts? 
Indeed, just to contact us and we are honored to offer you samples to you for examining. 

4. How about the time of shipping and delivery? 
For the products in inventory, it will be sent out in 1-3 days Or it will be sent out 3-thirty times according to the quantity. 

5. What’s your merchandise primary line? 
Considering that 2007, we specialised in producing all types of linear shaft, linear bearing, flange bearing, ball screw, linear CZPT way, linear movement ball bearing, needle roller bearing, and many others. 

six. How can I get a quotation? 
Typically, we will quotation within 24 hours. If you are in urgent, you should give a call or allow us know in your email with the information. 
We need to have data bellow: 
1. The Design Number/ the depth drawing of non-regular bearing 
2. Quantity 
3. Material 
four. Surface area treatment 
5. Any particular packing or other demands. 

US $1
/ Meter
|
1 Meter

(Min. Order)

###

Material: Carbon Steel
Load: Drive Shaft
Stiffness & Flexibility: Stiffness / Rigid Axle
Axis Shape: Straight Shaft
Appearance Shape: Round
Transport Package: Standard Export Package/Customzied

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Linear Shaft  (Linear rod; Steel bar; Optical axis)
Product Name High precision Steel bar 20mm Linear bearing shaft (WCS20 SFC20)
Model No. WCS20 SFC20
Available Model No. WCS SFC WC SF series 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 13mm, 16mm,  20mm,  25mm,  30mm,  35mm, 40mm, 50mm, 60mm, 80mm, 100mm, 120mm, 150mm
Material Carbon Steel, Bearing steel
OEM & ODM Yes
Hardness HRC60 ± 2
Hardened layer thickness

0.8mm-3mm

Length 0-6000mm (If you need above 6000mm,we can anti-connect for you)
Precision g6
Roughness Within 1.5μm
Straightness Not excess 1.5μm of 100mm (Rmax)
Other Material Bearing Steel GCr15, Carbon Steel 45#, SUS440C 
OEM & Customized We are Professional bearing manufactory in China, the bearing of High Quality can be OEM & Customized according to your requirement, such as for thread shaft or not, Reduced shaft diameter, Coaxial Holes Drilled and Tapped, Flats-Single or Multiple, Key Way, Snap ring Grooves, Radial Holes Drilled and Tapped, Chamfering, etc.
US $1
/ Meter
|
1 Meter

(Min. Order)

###

Material: Carbon Steel
Load: Drive Shaft
Stiffness & Flexibility: Stiffness / Rigid Axle
Axis Shape: Straight Shaft
Appearance Shape: Round
Transport Package: Standard Export Package/Customzied

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Linear Shaft  (Linear rod; Steel bar; Optical axis)
Product Name High precision Steel bar 20mm Linear bearing shaft (WCS20 SFC20)
Model No. WCS20 SFC20
Available Model No. WCS SFC WC SF series 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 13mm, 16mm,  20mm,  25mm,  30mm,  35mm, 40mm, 50mm, 60mm, 80mm, 100mm, 120mm, 150mm
Material Carbon Steel, Bearing steel
OEM & ODM Yes
Hardness HRC60 ± 2
Hardened layer thickness

0.8mm-3mm

Length 0-6000mm (If you need above 6000mm,we can anti-connect for you)
Precision g6
Roughness Within 1.5μm
Straightness Not excess 1.5μm of 100mm (Rmax)
Other Material Bearing Steel GCr15, Carbon Steel 45#, SUS440C 
OEM & Customized We are Professional bearing manufactory in China, the bearing of High Quality can be OEM & Customized according to your requirement, such as for thread shaft or not, Reduced shaft diameter, Coaxial Holes Drilled and Tapped, Flats-Single or Multiple, Key Way, Snap ring Grooves, Radial Holes Drilled and Tapped, Chamfering, etc.

Guide to Drive Shafts and U-Joints

If you’re concerned about the performance of your car’s driveshaft, you’re not alone. Many car owners are unaware of the warning signs of a failed driveshaft, but knowing what to look for can help you avoid costly repairs. Here is a brief guide on drive shafts, U-joints and maintenance intervals. Listed below are key points to consider before replacing a vehicle driveshaft.
air-compressor

Symptoms of Driveshaft Failure

Identifying a faulty driveshaft is easy if you’ve ever heard a strange noise from under your car. These sounds are caused by worn U-joints and bearings supporting the drive shaft. When they fail, the drive shafts stop rotating properly, creating a clanking or squeaking sound. When this happens, you may hear noise from the side of the steering wheel or floor.
In addition to noise, a faulty driveshaft can cause your car to swerve in tight corners. It can also lead to suspended bindings that limit overall control. Therefore, you should have these symptoms checked by a mechanic as soon as you notice them. If you notice any of the symptoms above, your next step should be to tow your vehicle to a mechanic. To avoid extra trouble, make sure you’ve taken precautions by checking your car’s oil level.
In addition to these symptoms, you should also look for any noise from the drive shaft. The first thing to look for is the squeak. This was caused by severe damage to the U-joint attached to the drive shaft. In addition to noise, you should also look for rust on the bearing cap seals. In extreme cases, your car can even shudder when accelerating.
Vibration while driving can be an early warning sign of a driveshaft failure. Vibration can be due to worn bushings, stuck sliding yokes, or even springs or bent yokes. Excessive torque can be caused by a worn center bearing or a damaged U-joint. The vehicle may make unusual noises in the chassis system.
If you notice these signs, it’s time to take your car to a mechanic. You should check regularly, especially heavy vehicles. If you’re not sure what’s causing the noise, check your car’s transmission, engine, and rear differential. If you suspect that a driveshaft needs to be replaced, a certified mechanic can replace the driveshaft in your car.
air-compressor

Drive shaft type

Driveshafts are used in many different types of vehicles. These include four-wheel drive, front-engine rear-wheel drive, motorcycles and boats. Each type of drive shaft has its own purpose. Below is an overview of the three most common types of drive shafts:
The driveshaft is a circular, elongated shaft that transmits torque from the engine to the wheels. Drive shafts often contain many joints to compensate for changes in length or angle. Some drive shafts also include connecting shafts and internal constant velocity joints. Some also include torsional dampers, spline joints, and even prismatic joints. The most important thing about the driveshaft is that it plays a vital role in transmitting torque from the engine to the wheels.
The drive shaft needs to be both light and strong to move torque. While steel is the most commonly used material for automotive driveshafts, other materials such as aluminum, composites, and carbon fiber are also commonly used. It all depends on the purpose and size of the vehicle. Precision Manufacturing is a good source for OEM products and OEM driveshafts. So when you’re looking for a new driveshaft, keep these factors in mind when buying.
Cardan joints are another common drive shaft. A universal joint, also known as a U-joint, is a flexible coupling that allows one shaft to drive the other at an angle. This type of drive shaft allows power to be transmitted while the angle of the other shaft is constantly changing. While a gimbal is a good option, it’s not a perfect solution for all applications.
CZPT, Inc. has state-of-the-art machinery to service all types of drive shafts, from small cars to race cars. They serve a variety of needs, including racing, industry and agriculture. Whether you need a new drive shaft or a simple adjustment, the staff at CZPT can meet all your needs. You’ll be back on the road soon!

U-joint

If your car yoke or u-joint shows signs of wear, it’s time to replace them. The easiest way to replace them is to follow the steps below. Use a large flathead screwdriver to test. If you feel any movement, the U-joint is faulty. Also, inspect the bearing caps for damage or rust. If you can’t find the u-joint wrench, try checking with a flashlight.
When inspecting U-joints, make sure they are properly lubricated and lubricated. If the joint is dry or poorly lubricated, it can quickly fail and cause your car to squeak while driving. Another sign that a joint is about to fail is a sudden, excessive whine. Check your u-joints every year or so to make sure they are in proper working order.
Whether your u-joint is sealed or lubricated will depend on the make and model of your vehicle. When your vehicle is off-road, you need to install lubricable U-joints for durability and longevity. A new driveshaft or derailleur will cost more than a U-joint. Also, if you don’t have a good understanding of how to replace them, you may need to do some transmission work on your vehicle.
When replacing the U-joint on the drive shaft, be sure to choose an OEM replacement whenever possible. While you can easily repair or replace the original head, if the u-joint is not lubricated, you may need to replace it. A damaged gimbal joint can cause problems with your car’s transmission or other critical components. Replacing your car’s U-joint early can ensure its long-term performance.
Another option is to use two CV joints on the drive shaft. Using multiple CV joints on the drive shaft helps you in situations where alignment is difficult or operating angles do not match. This type of driveshaft joint is more expensive and complex than a U-joint. The disadvantages of using multiple CV joints are additional length, weight, and reduced operating angle. There are many reasons to use a U-joint on a drive shaft.
air-compressor

maintenance interval

Checking U-joints and slip joints is a critical part of routine maintenance. Most vehicles are equipped with lube fittings on the driveshaft slip joint, which should be checked and lubricated at every oil change. CZPT technicians are well-versed in axles and can easily identify a bad U-joint based on the sound of acceleration or shifting. If not repaired properly, the drive shaft can fall off, requiring expensive repairs.
Oil filters and oil changes are other parts of a vehicle’s mechanical system. To prevent rust, the oil in these parts must be replaced. The same goes for transmission. Your vehicle’s driveshaft should be inspected at least every 60,000 miles. The vehicle’s transmission and clutch should also be checked for wear. Other components that should be checked include PCV valves, oil lines and connections, spark plugs, tire bearings, steering gearboxes and brakes.
If your vehicle has a manual transmission, it is best to have it serviced by CZPT’s East Lexington experts. These services should be performed every two to four years or every 24,000 miles. For best results, refer to the owner’s manual for recommended maintenance intervals. CZPT technicians are experienced in axles and differentials. Regular maintenance of your drivetrain will keep it in good working order.

China Bearing Factory Supply Directly 20mm Round Steel Bar Linear Shaft (WCS20 SFC20)     with Good quality China Bearing Factory Supply Directly 20mm Round Steel Bar Linear Shaft (WCS20 SFC20)     with Good quality
editor by czh 2022-12-24